Sensor Suhu Internal ATmega328

It turns out the Arduino 328 has a built in thermometer. Not the old Mega8 or 168. Not the Arduino Mega. Just 328 based Arduinos. The sensor isn’t very accurate – the data sheet says ±10°C.

long readTemp() {
  long result;
  // Read temperature sensor against 1.1V reference
  ADMUX = _BV(REFS1) | _BV(REFS0) | _BV(MUX3);
  delay(2); // Wait for Vref to settle
  ADCSRA |= _BV(ADSC); // Convert
  while (bit_is_set(ADCSRA,ADSC));
  result = ADCL;
  result |= ADCH<<8;
  result = (result - 125) * 1075;
  return result;
}

void setup() {
  Serial.begin(9600);
}

void loop() {
  Serial.println( readTemp(), DEC );
  delay(1000);
}